Outback Kitters Ram 1500 DT Pre Runner Bar

Australia's strongest Pre Runner bar is now ready for the 1500 DT! And we have Australia's ONLY Pre Runner Bar to suit the Rebel.

If you want to complete the style of your Ram 1500 DT with a bit of extra frontal protection and lighting, then check out the pre runner bar from Outback Kitters.

With a high clearance rate of 360mm from the ground and a steel bash plate, you know that you're going to be well protected wherever you're going.

The total weight of the bar, all mounting brackets and lightbars are 75kg.

• 6mm Alloy Bar with Protective Hoop.
• 8mm Steel Winch Cradle (Powder Coated Black).
• RATED Front Recovery Points to 7,000kg on a single line pull.
• Machine Recovery Points suitable for Soft Shackles or D-Shackles.
• Compatible with Front Parking Sensors.
• Recessed Winch Fairlead.
• Large access holes for air flow / winch clutch access.
• 2 x Roadvision 13" Stealth Lightbars with Black Lens (Range: 605m at 1 Lux) 
• Built to suit ADR 69 Compliance and Australian Standards.
• Raw, unpainted finish
• Includes Fitting Kit with all necessary bolts, washers and nuts.
• Optional: Sherpa Steed 17,000lb Winch Don't settle for less on such a big rig!
• Optional: Roadvision 30" Stealth Dual Row Lightbar (Range: 929m at 1 Lux - fits below front hoop).
• Made in Brisbane, Australia.

This is to suit the 2019+ Ram 1500 DT. This will NOT suit the Ram 1500 DS (Classic) Model.

If you have the Ram 1500 DT Rebel, make sure you select the right product. This has a specialised design to suit the unique grille.

Make sure your bar has at least 15-19mm clearance between the body and the bar to allow for body roll and movement. This bar was designed to ensure that you do not have any panel damage from your overlanding adventures!

Please note -  winches larger in shape than the Sherpa 17,000lb Winch will not fit.

Installation Instructions can be located here.